Space Saver Spanner by Reliable Fire
Products
The
SpaceSaver spanner wrench lives up to it's name. The wrench is plasma cut from 3/16"
steel plate for maximum durability. In other words, it isn't going to
break if you must use the gas cock shutoff feature. And, since it has a
flat profile, several wrenches can fit in the spot that has been set aside for a
single common spanner. The picture on the right shows that three SpaceSaver spanners will fit in a Red Head spanner bracket position that was
designed to hold a single standard spanner. So, if you have two Red Head
brackets on your apparatus you can now hold twelve spanners in the same space as
four of your current ones.
The SpaceSaver spanner wrench works on 1-1/2" and up to 6" rocker lug type
couplings and adapters.
Kochek Universal Spanner Universal Spanner
Cast from aluminum alloy, this is arguably
the toughest of the aluminum spanners we have found. The location of the
gas cock shutoff allows use of the wrench in a more natural position than some
other brands of spanners. This spanner effectively fits 3/4" through 6"
rocker lug and pin lug couplings.
Pin Hole Spanner
This spanner is cast in aluminum for
strength and light weight. This is a very compact spanner at only 7-1/2" long. And,
since it weighs only 3 ounces, it can easily be carried in a turnout coat pocket
without wearing through the material too soon. This spanner is designed to
be used with 3/4" and 1" booster hose couplings.
Single Spanner Hydrant Wrench
This hydrant wrench will accommodate pentagon heads up to 1-3/4"
in size and square heads up to 1-1/4" across. It is equipped with a single
hook spanner that fits either rocker or pin lugs on couplings and fittings from
3/4" through 6". You can tell it is a heavy duty wrench because it weighs
in at a full 4 pounds and is 18-1/2 inches long. The end of the handle is
knurled for a secure grip when dealing with stubborn hydrants.
Double Spanner Hydrant Wrench
This wrench is not only equipped with two spanner lugs it is
also designed to fit slightly bigger hydrant nuts. It will accommodate a
1-7/8" pentagon or a 1-1/2" square nut. An additional feature is the
replaceable brass jaw that will absorb rather than inflict damage on the hydrant
nuts. It also features knurling on the end of the handle for a secure
grip. It weighs in at 5 pounds and is 19-1/2 inches long.
Spanner Wrench Brackets
David's stocks two different spanner wrench brackets for
your convenience. The bracket to the left is
designed to hold two Storz spanners but we have found that it will also fit two
universal spanners or six SpaceSaver Spanners.
The bracket to the right is designed
to hold two universal spanners (will hold six SpaceSavers) in addition to either
one of the hydrant wrenches described above.
Storz Hydrant Wrench
|